Got GPS PPS GPIO interrupts working correctly on Galileo Gen2 board :-)
Fellow Galileo Makers, I got a breakthrough today and was able to get PPS GPIO interrupts working with a Galileo by doing some minor Galileo kernel modifications to the Galileo Gen2 plaftorm driver...
View ArticleRe: Yocto Linux start problems
In default position pin 2 and 3. DS3 Led is on. In the other position it seems work well but DS3 Led is intermitent..In both positions j2 have 0.6 volts. I´ve checked partitions and i found this...
View ArticleRe: Issues with i2c on Galileo gen2 board
I tried the same camera module using Arduino uno and i2s scanner sketch was able to detect the device at slave address 0x21.
View ArticleRe: Intel AC7260 limited access after sleep
joe_intel: It appears that philsward found a very simple configuration fix to this problem as described in the following post: https://communities.intel.com/message/253403#253403 I've been running on...
View ArticleRe: Is there any gps breakout board or shield that work with intel galileo ?
kabaryFYI for my Fellow Galileo Makers, I'm using the Adafruit Ultimate GPS logger shield for GPS v3 on a Galileo GEN2 board and it works for me OK. To get the NMEA messages, you do have to make a...
View ArticleIntel HD Graphics 4000 on Inspiron 15z 5523
Hello,I have a new DELL Inspiron 15z 5523 laptopCPU Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz Maximum speed: 2.00 GHz Sockets: 1 Cores: 2 Logical processors: 4...
View ArticleUndecided wheter to use node.js or C/C++ for IoT proyect.
This is my fist time as a poster so please correct my if I'm doing something I'm not supposed to.Some colleagues and I are developing an IoT cloud-based hydroponics automatization system and we are not...
View ArticleClik here to view.
Re: Suitable SD voltage level translators?
Slatye, I was able to determine the voltage level translator used on the Sparkfun micro SD block. I zoomed in on the image and found the marking 5MR which matches the TI TXB0108...
View ArticleRe: Galileo Gen 1 vs Gen 2 problem
I saw exactly the same ADC behavior on my G2 with updated FW 1.03 ; the saw-tooth wave showed up when I put the voltage source on A0 (or other AI ports). When the signal source is removed, the analog...
View ArticleClik here to view.
Re: Intel HD 4600 and Outlook 2013 - white screen
Thanks Richard - but a date should be made public as many user's are facing the same issue.Any provisional dat ethat has been set for release. I really think this is well overdue.
View ArticleRe: Edison wifi connects, but no status page
Indeed, with a new flash complete (v68) everything matches the doc perfectly.
View ArticleD54250WYKH network/pxe boot fail after bios update
Hi, I've having issues booting from network/pxe after updating to bios version 28. I can successfully install windows over pxe if I revert it back to version 21. Bios version tested and failed: 22, 25,...
View ArticleRe: Galileo Debian v1.2 image
StuartAnderson wrote: The instructions in the wiki "How to expand the root filesystem to use the entire SD card" is the easiest way. It uses non-GUI parted utility.I doubt it's the easiest way -...
View ArticleFan control
Hi, I am a video enthousiast and bought a W2600CR workstation for rendering and editing. I am new with server boards. I managed to get the machine up and running. Had a few hickups along the way, but...
View ArticleRe: Flashing edison over wifi (mac)
rosenrot you were spot on, with a new flash complete (v68) everything matches the doc perfectly. I'll have to wait to test the wifi upgrade method till a new version is released, but I pretty sure all...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
I don't think, I have PROSET software on my PC. Also is it worth to get the NIC replaced with the same version? I understand there have been negative reports on it but from a technical point of view,...
View ArticleRe: SSH to my edison?
I found that once I had wifi working I was able to ssh to the IP of the edison without any hiccups. Nice.
View ArticleCannot update Driver to 15.33.22.64.3621
Hello, I have been trying to update my driver for quite a while now. The computer continues to give me a "not compatible with current operating system", when the INTEL Download Center says that it is...
View ArticleClik here to view.
Re: Intel centrino wireless-n 2230 keeps dropping connection.
After months of problems with limited WiFi and general connectivity problems on Windows 8.1 I finally managed to get it to work properly. In advanced TCP/IP settings under IPv4 protocol settings I put...
View Article