In default position pin 2 and 3. DS3 Led is on.
In the other position it seems work well but DS3 Led is intermitent..
In both positions j2 have 0.6 volts.
I´ve checked partitions and i found this
root@AlberEdison:~# fdisk -l
Disk /dev/mmcblk0: 3909 MB, 3909091328 bytes
1 heads, 16 sectors/track, 477184 cylinders
Units = cylinders of 16 * 512 = 8192 bytes
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 1 477185 3817472 ee EFI GPT
Partition 1 does not end on cylinder boundary
Disk /dev/mmcblk0boot1: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/mmcblk0boot1 doesn't contain a valid partition table
Disk /dev/mmcblk0boot0: 4 MB, 4194304 bytes
4 heads, 16 sectors/track, 128 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/mmcblk0boot0 doesn't contain a valid partition table
Boot partitions don´t seems normal. I´ve tried to flash Edison with flashall over Windows 8.1 but it seems do nothing. (all process takes about 3 seconds)
Using U-boot target: edison-blank
Now waiting for dfu device 8087:0a99
Please plug and reboot the board
Dfu device found
Flashing IFWI
Flashing U-Boot
Flashing U-Boot Environment
Flashing U-Boot Environment Backup
Flashing boot partition (kernel)
Flashing rootfs, (it can take up to 5 minutes... Please be patient)
Rebooting
U-boot & Kernel System Flash Success...
Your board needs to reboot twice to complete the flashing procedure, please do n
ot unplug it for 2 minutes.