Re: Edison w/ Arduino Expansion board no longer boot with 12V supply
Honestly I do not know what exactly is going on with the boards. Maybe J1 would work with a lower voltage DC power supply? Maybe the VIN header is connected into a different pin of the SWITCHER and so...
View ArticleRe: NUC DN2820FYKH and WiDi
My DN2820FYKH constantly refuses to run WIDi 3.1.29 and 3.0.13, and even to install 4.2.29 at all, reporting the system that is not compatible with WiDi. However, when I use Windows 8.1 charms bar...
View Articlehas the centrino 6150/6250 variant been ditched?
I was just looking at the Intel wireless SW and drivers and noticed that for some reason, since 16.11 and going until even the (development?) 17.13.0.9 version, the 6150 and 6250 seem to be the only...
View ArticleRe: Can´t Remove Motherboard on Nuc D34010WYK
I have the same problem, did to solve it?
View ArticleRe: D34010WYK issue with USB 3.0 HD
I recently spend some time figuring out this problem and can confirm that - in my case - the following BIOS setting (I'm running BIOS 0030) fixes the problem of the drives not being detected by the...
View ArticleRe: How best proceed with overheating i7-4790K?
ShadiElwan, It's your processor so you can choose what you want to do, but if it was me, I would NOT be satisfied with a chip running in 90C-100C on stock settings even with a stock cooler. When Intel...
View ArticleRe: D34010WYK does neither boot from USB 3.0 nor boots with plugged USB 3.0...
I recently encountered the problem of my USB 3.0 drives not being detected after a cold boot until I restart the system once. I was able to fix this issue and other USB issues I had with my NUC by...
View ArticleRe: D54250WYK fails to present HDMI output upon wakeup
I have the same adapter and had the same issue. You can solve it temporarily by connecting the adapter to a USB 2.0 hub, then connect the hub to the NUC. Then, update your BIOS to the newest version...
View ArticleRe: Use an USB2AX on Galileo G2 (ttyACMx) device?
Maybe I am missing something, like what capabilities the server mode USB has and if there is anything I need to do enable things. Today I tried a few different things, like I updated to Alex'T s...
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
karwos, When running your program, I'm not clear about the results. What does it mean when I'm not getting any special characters and only "."? Is this a good thing or a bad thing? With the previous...
View ArticleRe: Galileo Debian v1.2 image
As I was having issues with Yocto not seeing my devices on the USB on my Galileo G2, I thought I would try out the Debian build. Thanks!Took two attempts, the first one downloaded the 1.0... build,...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Yes, it's the same kernel. It's built using bitbake in the Yocto environment, and then copied to the Debian image or system.So if it's a kernel driver that's missing, you'll need to build the kernel...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
u-boot on Edison expects vmlinuz (not vmlinux) to be present in the vfat boot partition (partition 7). NOT bzImage in the /boot folder in the ext4 partition, which is entiretly redundant. Why that's...
View ArticleBricked Board
How do I determine if my board is bricked? Here is my situation. I am trying to telnet into it so I can start working with Motion, and I was unable to connect over Ethernet. I then decided to just run...
View ArticleRe: HP 2740p cannot Install Widi software, meet all requirements...
Hello Jay,I had the same problem before, although my laptop-hardware meets all conditions I had this problem.My issue was a second graphic card (HD 4000 integrated plus NVIDIA GTX 675 m). I shut down...
View Article2 core 2 thread and 1 core 2 threads
If 2 core 2 thread and 1 core 2 threads. which s best (fast) ? Sorry my bad English and silly question. I don't understand about thread correctly
View ArticleMy Intel Edison project
I have recently bought an Intel Edison with the Arduino compatible breakout board. I am planning to use this for an universal translator project. Something like this:...
View ArticleIntel Galileo - Can't upload sketch while boot from Big Linux Image
HI there, I'm new to Ardiuno in general and I'm a bit confused as to how this is all supposed to work. I've got a Galileo - it came with Windows. I've gone to the Software Downloads page and downloaded...
View ArticleX540 performance
We have two Cisco C240 servers running Windows Server 2008 R2 Datacenter with X540 cards directly connected with cat 6A cord and they only run 0.1 Gbps (1%) with iperf. What am I doing wrong?Intel site...
View ArticleClik here to view.
Re: sketch upload fails: "transfer incomplete"
I just got a peek of the journal files and most of the records are related to the mDSN system.I wonder how to stop it.
View Article