Re: Intel® Wireless-N 7260 - slows
Oops, I should have mentioned (although it is in the topic title), yes it is a Dual Band 7260-N wireless card. And I don't even get 3MB/s from it. Terribly frustrating.
View ArticleRe: Response Requested: What's in your Edison HDK?
I think the microPEM SMTSO standoffs are usable.http://www.pemnet.com/fastening_products/pdf/mpfdata.pdfThe standoffs are on page MPF-7. I did not check if the diameter is ok.
View ArticleRe: how to register new snmp oid on galileo?
Hi Marss, I'm not familiar with that, so I'm not sure if I am understanding all the details. The communication between the Galileo board and the Android device is through network, right? Make sure both...
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
So you did not add the debug serial to you board ?FWIW, are you aware of this GPS module. https://www.sparkfun.com/products/10890 I have made many GPS enabled devices and this one has been by far the...
View ArticleRe: What is the difference between i3, i5 and i7 processors?
The i3-380M is a first generation Intel® Core processor.
View ArticleRe: Board DP67BG shows code 37, No beep errors
of course, no support by intel, what a surprise
View ArticleRe: Core i7 4790k @ Noctua NH-D15 & GA-Z97X-G1 overvoltaging by motherboard,...
Hmm, but You meant chipset, right? Because it works just fine on my ASUS motherboard.
View ArticleRe: HD4600 - Random Cut to Black
Does it work properly when connecting the TV directly, bypassing the AVR?I would suggest using a different HDMI cable if possible, quality may be a suspect.This is just one of the available options:...
View ArticleRe: Intel® Wireless-N 7260 - slows
Hey MichaelWDarlington - not that it matters too much as we know this is related to the intel card but I noticed you have the same new Asus laptop that I just purchased as well Did you see my earlier...
View ArticleClik here to view.
Re: HD4600 - Random Cut to Black
The HDMI cable is of good quality. I have tested the cable with another source and it's fine.Same issue occurs when connected directly to the TV.This issue does not occur when using any other device...
View ArticleRe: SPI pins on the breakout board.
Hi Tianli, I was wondering if you got SPI working? I am working on a design project using SPI camera module and maybe you could guide me with SPI. thanks,Danny danny7yoo@gmail.com
View ArticleRe: Youtube/netflix problems in windows 8.1, Unable to install chipset and...
The install issue is something with their drivers and possibly their new driver detect app you have to use. I have the same issue on a d54250wyk with the (very old and seemingly out of date) chipset...
View ArticleRe: OneWire/DS18B20 Sensors on Node.js/mraa for the Edison.
Shouldn't take too long as you don't have to build everything but only the kernel. The cross binutils would have to be built as well of course.
View ArticleRe: OneWire/DS18B20 Sensors on Node.js/mraa for the Edison.
And well you don't have to build the kernel. I think there is even a "bitbake -c menuconfig yocto-linux" which would run through the config
View ArticleRe: Graphics problem.
The specifications from few web pages indicate it is Intel® HD Graphics 3000.
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
The schematics for the Arduino board and the Mini-Breakout board are available at Software & Documentation. Here's a direct URL for the schematic for the Mini-Breakout board:...
View ArticleRe: Intel RST (Windows application) not offering to preserve data when...
Hi Joe, I've attached both files. The drives I want to RAID are labelled Drive 1 and Drive 2 in Disk Management (the 1.8TB drives). Thanks for your patience on this!
View ArticleRe: Divorce from Adapters: Taking the Custom "Block" Plunge
One can "learn by example" by looking at the schematics for the existing boards, but it would be nice to actually have some information on the PMIC. Is there any documentation on the PMIC? I've...
View ArticleIntel Edison Camera Module
Hi, I am trying to create a wearable low-resolution personal security camera using Intel Edison.My goal is to get real-time video between 10-15FPS I was wondering which interface (SPI, CSI, USB, etc)...
View ArticleClik here to view.
Use an USB2AX on Galileo G2 (ttyACMx) device?
I have been playing around with both Intel Edison's and a Intel Galileo G2 and was seeing about if I could get the same sketch to work on the Galileo that I now have running on the Edison. I am using...
View Article