As I was having issues with Yocto not seeing my devices on the USB on my Galileo G2, I thought I would try out the Debian build. Thanks!
Took two attempts, the first one downloaded the 1.0... build, Tried again and again it wanted to download the 1.0 file, so went to files and found the 1.2 version and downloaded it.
Used GParted to expand partition...
My first attempt it worked that it saw my devices (note I plugged them in after I booted. Found and created the USB2AX and created ttyACM0, found FTDI serial cable created ttyUSB0 and I think saw an Edimax USB wifi.... So I rebooted with the USB hub plugged in and it wants to hang (or at least take forever to boot).
Booting 'Debian GNU/Linux, with Linux 3.8.7'
Loading Linux 3.8.7 ...
Loading initial ramdisk ...
error: no suitable mode found.
Booting however
[ 2.097449] console [ttyS1] enabled, bootconsole disabled
[ 2.114743] brd: module loaded
[ 2.127255] loop: module loaded
[ 2.131559] lpc_sch_probe BIOS_CNTL 0x00000101
[ 2.136076] lpc_sch_probe new BIOS_CNTL 0x00000101
[ 2.141052] lpc_sch_probe RCBA @ 0xfed1c000
[ 2.151907] rtc_cmos 00:01: RTC can wake from S4
[ 2.161095] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.167549] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 2.174547] cpuidle: using governor ladder
[ 2.178715] cpuidle: using governor menu
[ 2.183096] sdhci: Secure Digital Host Controller Interface driver
[ 2.189363] sdhci: Copyright(c) Pierre Ossman
[ 2.194118] sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
[ 2.250436] mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
[ 2.257812] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.278936] eSRAM: CTRL 0x047f3f91 block 0x00000000
[ 2.283999] eSRAM: pages 128
[ 2.310813] intel_qrk_esram_test_probe/Sep 8 2014/03:48:09 complete OK !!
[ 2.323045] TCP: cubic registered
[ 2.326430] NET: Registered protocol family 17
[ 2.334155] Using IPI Shortcut mode
[ 2.355354] Magic number: 6:124:287
[ 2.359566] tty tty20: hash matches
[ 2.363531] rtc_cmos 00:01: setting system clock to 2014-11-09 16:17:47 UTC (1415549867)
[ 2.389072] mmc0: new high speed SDHC card at address b368
[ 2.395498] Freeing unused kernel memory: 312k freed
[ 2.408145] Write protecting the kernel text: 3424k
[ 2.414355] Write protecting the kernel read-only data: 1316k
[ 2.420289] NX-protecting the kernel data: 2720k
[ 2.427577] mmcblk0: mmc0:b368 USD 3.75 GiB
[ 2.460557] mmcblk0: p1 p2
Loading, please wait...
[ 2.762168] udevd[43]: starting version 175
[ 2.831173] tsc: Refined TSC clocksource calibration: 399.076 MHz
[ 2.837511] Switching to clocksource tsc
[ 4.318323] ACPI: bus type usb registered
[ 4.351500] usbcore: registered new interface driver usbfs
[ 4.358032] usbcore: registered new interface driver hub
[ 4.471413] usbcore: registered new device driver usb
[ 4.700637] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.852948] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.859789] ohci_hcd 0000:00:14.4: OHCI Host Controller
[ 5.037980] ohci_hcd 0000:00:14.4: new USB bus registered, assigned bus number 1
[ 5.087768] stmmac: Unknown symbol intel_cln_plat_get_mac (err 0)
[ 5.145501] ohci_hcd 0000:00:14.4: irq 16, io mem 0x9000c000
[ 5.241808] stmmac: Unknown symbol intel_cln_plat_get_id (err 0)
[ 5.296447] stmmac: Unknown symbol intel_cln_plat_get_mac (err 0)
[ 5.338114] hub 1-0:1.0: USB hub found
[ 5.377988] stmmac: Unknown symbol intel_cln_plat_get_id (err 0)
[ 5.468897] hub 1-0:1.0: 2 ports detected
[ 5.870438] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 5.878946] ohci_hcd 0000:00:14.4: bad entry bc92080
It first appears to want to hang here
udevadm settle - timeout of 120 seconds reached, the event queue contains:
/sys/devices/pci0000:00/0000:00:14.4/usb1 (812)
/sys/devices/pci0000:00/0000:00:14.4/usb1/1-0:1.0 (813)
udevadm settle - timeout of 120 seconds reached, the event queue contains:
/sys/devices/pci0000:00/0000:00:14.4/usb1 (812)
/sys/devices/pci0000:00/0000:00:14.4/usb1/1-0:1.0 (813)
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
udevadm settle - timeout of 10 seconds reached, the event queue contains:
/sys/devices/pci0000:00/0000:00:14.4/usb1 (812)
/sys/devices/pci0000:00/0000:00:14.4/usb1/1-0:1.0 (813)
Begin: Running /scripts/local-premount ... done.
[ 255.998474] kjournald starting. Commit interval 5 seconds
[ 256.005025] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
mount: /dev not mounted or bad option
[ ok ] Activating swap...done.
[ 321.366882] EXT3-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[ 321.400581] EXT3-fs (mmcblk0p2): using internal journal
[ 323.033197] g_serial: Vendor 0x0525 Product 0xa4a7
[ 323.038474] g_serial gadget: Gadget Serial v2.4
[ 323.081912] g_serial gadget: g_serial ready
[info] Loading kernel module pch_udc.
[info] Loading kernel module g_serial.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.20.1
done.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[....] Configuring network interfaces...[ 339.944132] NET: Registered protocol family 10
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Cannot find device "eth0"
Bind socket to interface: No such device
Failed to bring up eth0.
done.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
It is now maybe 10 minutes and still no login prompt:
Will reboot now, with no USB devices plugged in...
I get the login prompt, probably arount time 54.60 seconds.
But now when I plug in lets say the FTDI device I only get
[ 115.750378] usb 1-1: new full-speed USB device number 2 using ohci_hcd
[ 115.758453] ohci_hcd 0000:00:14.4: bad entry e6fc080
Note: this is without plugging in hub, if I unplug it and for example plug in hub, I see no new messages show up with dmesg | tail
Also note: I am getting that error about Ramdisk on every boot, not sure if it is an issue or not.
Suggestions?