Quantcast
Browsing all 18089 articles
Browse latest View live

Image may be NSFW.
Clik here to view.

Re: Why DH77KC and DB75 EN Motherboard cannot Run Gainward Gforce GT630 2Gb...

The following link will give all the instructions you need to follow. Desktop Boards — BIOS Update InstructionsRemember that motherboards are electronic devices and they can fault at any time.  So...

View Article


Re: HD Graphics for Previous Generation Core i5 - 661

I finally found a driver version that worked: 8.15.10.2622 (GFX_Vista_Win7_64_8.15.10.2622.exe)

View Article


Image may be NSFW.
Clik here to view.

Re: Does Edison support Audio and Video?

Hi AlexT_Intel, I used your repo and installed kernel_module snd-usb-audio module, alsa utils and mpg123. I plugged in the usb sound card. The alsamixer didn't seem to recognize the device. The...

View Article

Re: Windows 7 Drivers

You will get a better response in the General Discussion forum.I have moved your post there. Doc

View Article

Re: Intel HD GRAPHICS CONTROL PANEL SERVICE会造成语言栏的不正常显示。

You will get a better response in the Graphics forum.I have moved your post there.Also, if you can post in English, that would be better. Doc

View Article


Re: What is the best i5 processor (apu) for gaming. What processor (apu) can...

Toshiba support is Official Toshiba Support | ToshibaThe Toshiba forum is Home - TOSHIBA FORUMS Doc

View Article

Re: Creating a complete, flashable image

You want to loopback mount the .ext4 file, which contains the root.  The .hddimg image contains a fat32 partition with the kernel.

View Article

Re: DH67BL intrusion error

Ok, I will do this and tell you the results.I checked the error message:"The following are warnings that were detectedduring this boot.These can be viewed in setup on Event log Page.WARNING: Chassis...

View Article


Re: Creating a complete, flashable image

Thanks @alitt, will try that out.

View Article


Re: Does Edison support Audio and Video?

I am not sure if it is true for all USB sound cards.  I have a Sabrent (USB-SBCV), I think i purchased from amazon.com With it, I find I need to set it up to be the default PCM sound device (Had to do...

View Article

Image may be NSFW.
Clik here to view.

Re: Can't boot from USB drive with ISO elementary OS

Newbie error - I figured it out and am now happily working on my new Intel NUC with elementary OS (which is awesome, by the way!).I used Rufus to create the bootable USB with ISO of the OS installation...

View Article

Re: Intel Edison an Expensive Arduino Nano

I don't see gravemind post as trolling, but I have to admit he looks like he gave up (not really interested in answer to his questions/problems). I feel some of the concern people expressed here, but...

View Article

Image may be NSFW.
Clik here to view.

Re: How best proceed with overheating i7-4790K?

Hi guys, i'd like to share my own experience with overheating 4790k.Ater mounting brand new Gigabyte z97x gaming 5 with 4790k i ran occt and realized that temps might be too high. It was like 85-88...

View Article


Re: Intel HD Graphics - Installed in Device Manager,but shows as in advanced...

Did a reinstall of Windows 7 Pro, fixed the issue.  Sorry I couldn't figure out the cause, just punted.

View Article

Repositories for intel galileo

I have smart package manager on intel galileo board. I need <package-name>.deb or <package-name>.rpm or other packages. eg for package-name: vim editor, gcc , etc. So that I can install...

View Article


Re: I2C doesn`t work on my edison arduino board with mraa interface

I tried many many ways to figured out what is the problem of setting the sensor address, even rebuilded and reflashed image to slow bus speed down to 100KHz to feed the sensor, but all failed. So I had...

View Article

How to read binary data via Serial1?

I'm using a sensor that outputs binary data on UART.I connected it to Edison's Serial1 port and tried to read data, but faced several problems. 1)Until LF(0x0A) is sent, Serial1 doesn't work.My sensor...

View Article


Re: How to read binary data via Serial1?

There may be other ways to do this, but I use the stuff in#include <termios.h> For example for my code that reads data from the Arbotix Commander (XBee), some of the Init code looks like:   bool...

View Article

Overscan issue

Hi, So my TV does not save my pictures settings to fix the overscan issue. The only way to fix this is to customize the aspect ratio via Windows.. however the graphic drivers for the Intel NUC N2820...

View Article

Re: Galileo Shield Update

Hi guys, Just dropping a quick email to see if there is any news on how things are progressing and timing etc. Looking forward to the updates! Cheers,Z

View Article
Browsing all 18089 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>