Clik here to view.
Re: How best proceed with overheating i7-4790K?
LosGrak, It's hard to say what caused the BSOD and random shutdowns with the information you presented. Your settings all seem OK, but 50C at idle is much higher than average. Of course load...
View ArticleIntel® PROSet/Wireless Software and Drivers for Windows 7 Version 17.13.2...
Intel when are you going to release Intel® PROSet/Wireless Software and Drivers for Windows 7 Version 17.13.2 (Latest) and not just the IT version but the version for end users?
View ArticleRe: SPI + Edison Mini breakout board + MRAA on IoT devkit
1. Yes I am connecting the analyzer according the pins described at the MRAA website, which are MISO - j18_11 and MOSI - J17_12.2. Yes, ground is connected. I can see the signal for SCK channel and CS...
View ArticleRe: Overscan issue
dougho the problem is the Celeron NUC does not have this option even with the latest GPU drivers. However, I have read only the i3 and above models having the custom aspect option which I find...
View ArticleWhy Galileo Gen2 can't use the IRremote library downloadeded from Github
I want to make a IR controller after i saw a demo in Arduino Chinese Community.Then i try to learn it. but a fatal error occurred that i can't use the library because of the IDE i'm using is for...
View ArticleRe: DH87MC
GM Syl, No display is at the booting time. Graphics driver will be required at the time of running windows. Isn't it ? Does graphic driver has anything to do with the cold boot problem during POST
View ArticleRe: Edison stuck at boot time
thank you both. that worked out. i lost some data but its operable again
View ArticleRe: Asus Z87 Pro will not boot with a Intel X540-T2
Hi Charles, Did you try disabling any onboard NIC to test? With regards to the compatibility, you can check with Asus since most board vendor has validated hardware list for the system....
View ArticleRe: Analog Sampling Rate very low
do you mean by accessing the raw value via cat? cat /sys/bus/iio/devices/iio:device1/in_voltage0_raw ? sorry, I have no idea what you mean
View ArticleClik here to view.
Re: Asus Maximus VII Formula W/ On-Board Intel I218V won't connect at 1gbps
Hi Starvin_Marvin, Can you check if can force the gigabit port speed on the Linksys WRT 1900AC router to 1 Gbps? I checked on the tech spec, this router has 4x Gigabit LAN port. Just to...
View ArticleRe: GPIO Access Problem in Intel Galileo Gen2
Thanks Diego , Now I understand the rest configuration. Regards,Sunil
View ArticleWhat is the BLE Spec Edison adheres to?
Hello All, Did a quick look at the docs - I don't see the details on BLE - bluetooth# version returns Version 5.18 - I guess that refers to this: http://www.bluez.org/about/ But what about the...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
ROS Hydro on the Edison? Please do share.
View ArticleRe: HELP with Intel HD 4600 scaling options
Hi,Can you let us know if the scaling option selected is Center Image or Maintain Aspect Ratio when you play the game at lower resolution? One alternative solution if you want to run the game in 'Full...
View ArticleRe: DHT workaround for Galileo and Galileo Gen2 using 2 pins instead of one
As I predicted before - people are spending so much time trying to get Galileo to work with devices that need deterministic timing.The more proper workaround uses a 74hc125 or similar tri-state buffer...
View ArticleHow to automatically run program on Intel Galileo startup?
Hi all, Anyone did this before?I am using Eclipse to debug and run program on Intel Galileo gen2.However every time after I reboot the board the program will not start. I believe this need some...
View ArticleRe: DHT workaround for Galileo and Galileo Gen2 using 2 pins instead of one
There is only one way to connect a DHT22...Of course, the other proper solutiuon would be this:Don't use a Computer System (Galileo, BeaglBone, R-PI etc) when you really just need a Micro Controller...
View ArticleRe: Hostname service broken in ww50 release build
I can not find the ww50 release. Where can I download it?
View ArticleRe: New board dead?
That worked! I was able to get the blink sketch to work after running that command.
View Article