Re: DN2820FYKH - Win7 support coming?
Hi turbodewd, Yes Windows 7 drivers are coming. I don't have an exact date but they're coming soon. I'm not a huge fan of the Windows 8 interface, but using Classic Shell (free) on top of it makes it...
View ArticleRe: DN2820FYKH - Win7 support coming?
Thanx for the super prompt reply Jason, I await these drivertons!!!
View ArticleRe: DHD-131 and Windows 8.1 problems
I am also having trouble with this and Widi is a feature I use a lot, I chose my computer to be sure I had it. I bought an HP envy and hope there will be a resolution. My computer can still be...
View ArticleDN2820FYKH - BIOS, Boot menu and update issues
Hi there, I have three issues to report, using the latest BIOS update (21) for the DN2820FYKH. Installed is a 4GB kingston ram module (low voltage of course), and a Kingston V300 SSD (60GB)....
View ArticleNo HDMI Audio output from DN2820FYK
I have a DN2820FYK running Windows 8 with all the latest drivers installed, and no matter what I do, I cannot get any audio output from the HDMI port. I tried with both the Intel Graphics driver and...
View ArticleRe: Intel WIDI problems
I used WIDI auto update tool and: Support Knowledge BaseThis computer does not meet the Intel® WiDi system requirements.Oh really?And how i said - on old drivers my widi on my computer witch "does...
View ArticleRe: D54250WYK HDMI work issues and f2 boot setup problem
ok. i get it. my tv dont support this resolution. but what about my other monitors? why at sony 3d display it works perfectly but then it wont get signal?I go to my friend and try it on his sony tv. It...
View ArticleRe: NUC HTPC Sound issues
Same problem here, using all the latest drivers including Audio 6.0.1.7058Video 10.18.10.3383Bios version 21Windows 8.1 x64 I do not get any audio devices connected to an Onkyo 616.The onkyo clearly...
View ArticleRe: No HDMI Audio output from DN2820FYK
Hi, Try disabling Legacy boot in the BIOS. I initially had no HDMI audio in Windows 8.1 and disabling Legacy Boot caused it to start working on the next boot. Thanks. Jason
View Articlei350-T4 show "no iscsi boot port available"
Hi, I have recently bought a i350-T4 NIC, and flash the iscsi boot agent into it (18.8 version) After reboot , the rom said "error : no iscsi boot port available" and don't have the ctrl +d to do...
View ArticleRemovable Drive Not Showing Up
I don't know for sure if this is an Intel issue or a Windows issue: I have a DZ68BC MB at BIOS 0039, which seems fine.I have four SATA devices in the system now C:120GB SSD, F:1.5TB, D: 0.5TB, E: DVD...
View ArticleRe: igdkmd64.sys DRIVER_IRQL_NOT_LESS_OR_EQUAL BSOD (Win 8.1 64), updating my...
Well, contrary to what I was intending... I have only played 2 games of league in the past 3 or so days. No blue screens have occurred...yet.
View ArticleRe: Galileo rtc wake-up possibilities ?
Just to add to the question - wakeup implies a sleep. How do you put the chip into a low current sleep state? Is wakeup a reboot, or continue from where you were? What is current drain while asleep?
View ArticleRe: No HDMI Audio output from DN2820FYK
You shouldn't need to reinstall for Windows 8.1. I know your SSD will not show up when you first disable Legacy Boot, but on the next boot it should show up. Jason
View ArticleRe: Is it possible to use intel galileo for bare metal programming?
hello, I connected intel galileo with olimex arm-usb-ocd-h debugger and could use the openOCD console as in the document provided on intel site. can i use this debug console to add my programs to intel...
View ArticleRe: Galileo rtc wake-up possibilities ?
I keep time with a 3.3v coin battery on board battery connector. Set time for software and then sync clock to hardware. For safety and convenience, I keep it on a holder plugged in a very small blue...
View ArticleRebuilding Mirror Raid -- WHICH Drive is Being Rebuilt??
My RAID 1 mirror worked fine until a couple days ago, when it was triggered to start a rebuild. It seems to now be continuously rebuilding, in that I saw it go to 95% done, and when I looked a few...
View ArticleIntel RST AHCI driver installation issues!
Hello!!! I recently joined... I seem to be having some issues with correctly installing Intel RSTe drivers on my notebook... First of here are my Specs:Asus K55A NotebookIntel Core i3-3110MIntel...
View ArticleNTFS-3G USB HUB
Trying to mount an NTFS drive on the external usb port. Fat32 works no problem but I can't get ntfs to work. I have tried mount -t xxxx /dev/sda1 /mnt/sda1 where I had made the mnt sda1 directory and...
View Article