Re: Missing configure_edison?
This error I get when I try to: root@edison:~# ./configure_edison --help-sh: ./configure_edison: not found Without the "./" it works for me. Did you check if the configure_edison file is in /usr/bin...
View ArticleRe: SSH to my edison?
AnthonyWeb: I used the command configure_edison --setup. This configures the wifi, the password and there is something in there that enables the sshd server. Rui: The password requirement was enabled...
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
I've got the same problem after updating to 17.1.0.0 I deeply regret using the Intel® Driver Update Utility PC: Sony Vaio Pro, 64 bit
View ArticleRe: How best proceed with overheating i7-4790K?
Mine was described by the retailer as:- Intel 4th Gen Core i7 4790K 4.0GHz 88W HD4600 8MB Quad Core CPU
View ArticleRe: Info about SKUs listed at Mouser?
Hi,and then the last part that doesn't reflect a change in the description (matches up with .MP or .S part of the product number)I just had a look at Mousers Edison overview page...
View ArticleIntel RST in dual boot
I have an Intel D945GNT system board with Intel cpu and four SATA drives attached configured under Intel Matrix Storage Manage/Rapid Storage Technology as two RAID 1 pairs running under Windows XP Pro...
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
<<I deeply regret using the Intel® Driver Update Utility>> Got a Restore Point? Roll back that way. Or, go to Device Manager, click open the adapter to the driver tab. If "Roll Back"...
View ArticleRe: How best proceed with overheating i7-4790K?
And does the sticker on your box says: Batch: L4xxxxxx ?
View ArticleRe: Broken U.FL connector - advice?
I am going to try this, but using a laptop internal antenna's
View ArticleClik here to view.
Re: How best proceed with overheating i7-4790K?
I'm also having a cpu from batch 4, my guess is that this batch has a lot of faulty CPU's in it.
View ArticleD34010WYK Won't Boot
Hi, I have an Intel NUC D34010WYK that I have just bought and have installed the following two components: Memory: 1 x Samsung 2Gb 2Rx8 PC3 - 10600S. Bought this from the following site...
View ArticleRe: Geez I hate to ask: Linux+Eclipse+Xtools
Ok, looking back at this I gotta say I was outta line. I let the problem get under my skin. Guess I'm getting cranky in my old age. Anyway mhahn, you were trying to help and you did point me in the...
View ArticleRe: Accessing ADC samples on Intel Galileo
You will get a better response in the Forums . I have moved your post there. Doc
View ArticleRe: Windows 8.1 not booting after installing intel rapid storage latest driver
You will get a better response in the Chipsets forum. I have moved your post there. Doc
View ArticleRe: D34010WYKH Fast Boot setting problem
I updated BIOS to latest version 0030 with the following results:Now the Boot menu, on BIOS Screen Boot Configuration, is the same as in earlier version 0021 and practically the same as in your post....
View ArticleRe: Question regarding linux and galileo
so it appears you're not using the Intel(R) IoT developer kit SD card image (because that image wouldn't show "eth") or you have old firmware which wouldn't auto boot from SD card. I.E. it's not a...
View ArticleRe: Plex server causing Linux kernel panic - not syncing: Fatal machine check...
I did some more testing, and the result was posted in that post.
View ArticleRe: How to download packages in linux on edison?
they should be both safe to use. However, as mentioned "iotdk" is compiled for Galileo (Quark) and hence might not have the optimum optimization parameters you could have for Edision (Atom).And...
View ArticleRe: Tools to obtain P3700 current temperature?
Hi Zack, I have seen a couple of comparisons, not rigorous tests, where Intel tools and smartctl have reported the same temperature. I don't think smartctl is perfectly coded to use nvme devices but in...
View ArticleClik here to view.
Re: How to download packages in linux on edison?
... meant to be use for Edison as well I mean [seems there is no way for me to edit my posts ...]
View Article