Re: getting started: monitor shell?
Not related to this topic. I'm trying to figure out how to compile / download code now. Is there cc/gcc cross-compile, or do I have to do everything through the Arduino IDE? Only just starting to...
View Articlegetting started: programming options
What are the options for compiling code? e.g. a simple helloworld.c application, does that have to be built using the Arduino IDE, or is there a cc/gcc cross-compile option? (Note I'm using the Linux...
View ArticleRe: Stand-alone SCS or integration with SCCM? Both?
Yes you are able to setup an SCS server separately. Then at a later time use the SCS Add-on to integrate it into SCCM. It's absolutely possible to have full AMT functionality without using...
View ArticleRemoval of SAS R5 from RSTe....does ESRT2 EFI Boot?
Hello, I had previously offered the RKSAS4R5 as a software RAID 5 option for SAS disks. RSTe has been the preferred configuration because firstly it supports EFI boot and secondly I could pre-install...
View ArticleInstalling an RS232 Shield (cutedigi)
Hi All, I installed an RS232 Shield from Cutedigi on my Galileo Board (on Intel's list of compatible shields), then attempted to connect my Galileo to an older terminal from which I would like to...
View ArticleRe: Serial Communication with Arduino Shields
Thanks, I poked around and found that different arduino boards map the Serial, Serial1, Serial2 etc, software syntax to different physical serial ports on the boards. It looks like the Galileo is...
View ArticleRe: Rapid Start vs Rapid Response vs Rapid Storage
According to the Rapid Start guide you've linked to, you can install both Rapid Start and Smart Response on the same system, as long as you install Smart Response BEFORE setting up Rapid Start. Is the...
View ArticleRe: Removal of SAS R5 from RSTe....does ESRT2 EFI Boot?
1&2. SAS RAID 5 on RSTe is never supported, and is not likely to be added. See Intel® RAID Quick Reference Guide. 3. Unfortunately no. 4. I don't think there is a big difference in performance...
View ArticleRe: Questions about Linux and OpenCV on galileo board
I'm able to call a process like this from my home director:system("node /home/root/nodeGalileo/1_geoPlaces.js > /dev/ttyGS0"); This outputs a value to the serial monitor. How can I parse this value...
View ArticleRe: Cannot pass ipv6 packets into a VM using VFs (82599)
According to the RH kernel changelog, it states: [netdrv] ixgbe: fix inconsistent clearing of the multicast table When googling for that, I see:...
View ArticleRe: How to build Galileo UEFI BIOS
Dear AlexT, Thanks for your information!But this is really a bad new for us. Does Intel have the plan to release it? Best Regards,ZYQ
View ArticleRe: Intel NuC D34010wyk - Booting with 3 attached usb drives - Still not...
Thanks, that's good information. It tells us that the BIOS support for USB 3.0 isn't in the picture - though we can't necessarily rule out a general USB problem yet. We just connected three USB-based...
View ArticleRe: WIDI application won't keep on desktop after S3/S4 resume.
Thank you for your support.Do you have document or document No. for it to prove it is a valid statement?THX~
View ArticleRe: APP CRASH's with AC7260 Adapters
Yes I used the same form factor half minicard AC7260.HMW in both PC's. The laptop was originally fitted with an oem N6235 card. The desktop was made up from parts by myself and originally used a...
View ArticleIs my Intel i7-3630qm Processor Turbo Boost Capable?
Hello.. I just bought a New Sony Vaio Desktop with the Intel i7-3630qm 2.40Ghz / 3.40Ghz Processor in it.The model of the Computer is a SVL24147CXB and Sony advertises it as having Turbo Boost...
View ArticleRe: Installing an RS232 Shield (cutedigi)
Thank you chofrock - I managed to connect my Galileo using the audio jack and seeing the boot process on my PC. The reason for the shield though is old RS-232 equipment is +/- 12 volts and could fry...
View ArticleRe: Intel Rapid Storage Technology
My marvells have always been disabled on my P8z68 mobo, issue is still there.
View ArticleRe: Widi & Windows 8.1 problems
Hi Joe, The problem with making "Miracast the standard" is that it makes our WiDi equipment instantly obsolete for completely artificial reasons. My HDTV understand WiDi. It doesn't respond at all to...
View Article