Slow disk write performance
I tested simple reading and writing performance using dd on the /home volume which has sufficient space available. I did the testing with a 512 MB file using read/write block size of 1MB. The reading...
View ArticleRe: Edison wifi sniffing
I found this in the source in the brcm80211 directory, in wl_cfg80211.c.switch (type) { case NL80211_IFTYPE_MONITOR: case NL80211_IFTYPE_WDS: brcmf_err("type (%d) :...
View ArticleRe: can't install intelactivemonitor.exe on Intel motherboard dz77ga-70k
Glad you have it working. Yes, the error message could be a bit more helpful. However, back when Intel Active Monitor was written, boards that are much newer (such as yours) did not exist, and IAM did...
View ArticleRe: Intel P3700 PCIe 800GB SSD does not work with CentOS 6.6 or 6.5, but does...
The Intel's Linux NVMe Driver Reference Guide mentioned building the driver for linux kernel 3.10.0 and above.Intel® Download Center nvmexpress.org mentioned that the working Linux driver is included...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
But while I use the command iwconfig after I close the wpa_supplicant process, It can be worked.Just like that: first use "kill -9 xxxx(the number of wpa_supplicant PID)" and use "iwconfig...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
The reuslt is like the upstair's said, why can this be? While I using the "iw list" to see whether the NIC is supported or not . The result is YES. Can I compile another drivers of edison? If so...
View ArticleRe: Wifi connection error
Suddenly I'm dealing with the same error. It did work till this morning though.When I check the wpa it shows following: root@InfoCube_Edison2:~# journalctl | grep wpaDec 01 22:15:29 InfoCube_Edison2...
View ArticleRe: Intel Edison USB host mode
Okay I applied 12V to that input now and have it working. Thank you very much for your help guys!
View ArticleRe: DH61CR PS2 port not working after upgrading 48 to 120
The board BIOS cannot be reverted to 0048 once you updated to a later version. You would need to use USB port or USB hub to have more ports available for your computer. Allan.
View ArticleRe: Adafruit PN532 RFID board & Edison?
Hi ChemicalOli, I've just searched for information about that shield and it seems to be compatible with the Edison Arduino kit at least in the hardware side since the shield uses an I2C interface and...
View ArticleRe: Wifi connection error
I just fixed my error. In case someone is facing the same one, here is the solution. # cd /etc/wpa_supplicantHere you should see 3 filesOne of them say original in the enddelete the file WITHOUT the...
View ArticleRe: DZ77GA-70K and Wireless/Bluetooth adaptor
Here you have a very informative link:http://www.intel.com/support/motherboards/desktop/sb/CS-032116.htm Kevin M
View ArticleRe: Watchdog timer (WDT) on E38xx for Win7-64b doesn't work !?
I am going to verify all this information and I will be back with you as soon as possible.Kevin M
View ArticleRe: DN2820 powers after plug in usb stick 3.0
Svenry, there is a new BIOS version available for this NUC. Would you please download it and install it on your system? BIOS version 041 Intel® Download Center These are the fixes included on that...
View ArticleRe: Hardware reserved memory too high
Aomega, I' m moving your thread to the server’s community in order to get assistance on your Server Board. Regards,
View ArticleIntel D54250WYK + WIN 8.1 Shutdown
Hi, I have the Intel Nuc D54250WYK with 8gb RAM and mSATA hard disk 250gb + WIN 8.1 A few weeks until today i have one problema with the intel nuc, when i turn on the Nuc, it turn on correctly but...
View ArticleI am trying to update my intel HD 3000 graphics driver to the new version...
As said above I'm trying to update my intel HD 3000 graphics driver. The link I am downloading it from is: Intel® Download Center. Assuming that link works you will see a listing for many drivers. I...
View ArticleFor intel galileo gen 2 battery problem
I am a beginner, i have a problem with intel galileo gen 2 board. i power it with 9v battery, and then the power led keep blinking, it seem like insufficient power. Is there any way for me to power...
View Article