Re: I can't connect my laptop to my lg tv
We are investigating further. Do you know the TV's firmware version?
View ArticleRe: dfu-util for Windows
Hi SergeyK, Thank you for your feedback. I am not sure which dfu-util version is the correct one, I will look into it and post back. Regards,Intel_Jesus
View ArticleRe: smbfs/cifs/nfs support on edison?
I just got my Edison today. I have to say that this little guy is impressive. The lack of documentation from Intel, however, is not. Daveman is right. There is currently no way I can see to transfer...
View ArticleRe: smbfs/cifs/nfs support on edison?
You can transfer files to the Edison using scp. Adding NFS shouldn't be too difficult I wouldn't imagine. As for the configuration issues. I think most if not all of them have been fixed in the...
View ArticleRe: something went wrong. couldn't connect ptv3000 problem
We are investigating. I will come back to you as soon as we get more information about your issue.
View ArticleClik here to view.
Re: Intel RAID Web Console 2 and error "Servers could not be found..."
Yes and no: Email works well for me but it'd be nicer if there was an actual log like there was in RWC2. Information pertaining to the RAID subsystem should available at the server, not be sitting...
View ArticleRe: Trying to get started with the mini breakout board
You can solder short headers into the bottom of the Intel mini-breakout board. Then you can use breadboarding wires to connect to peripherals or to a prototyping board. They expose pin rows J17-J20...
View ArticleClik here to view.
Re: no ntp on edison?
Can the build team please consider integrating it into the default images?
View ArticleRe: NUC Boots up on its Own
Ok, let me know what happens to the NUC while using BIOS v0026. Have you tried using the NUC without a network card?
View ArticleRe: Is Rapid Storage Technology RAID compatible with TLER-aware disks like...
Hello!Thank you for very comprehensive introduction. Let’s consider two scenario ( both with TLER-capable hard drives):Let CRITICAL_ERROR means unrecoverable error code message that leads to disk...
View ArticleRe: HD4600 resolution problem with HP LA2405x monitor
Same problem here with a new HP ProDesk 600 G1 SFF PC and an old NEC MultiSync LCD 2690WUXi that looks best at 1920 x 1200. The HP system board is based on Haswell architecture and has an HD4600...
View ArticleRe: IWGAud_Device_06 not found while updating drivers during WiDi Update....
Kindly provide the following:Intel® System Identification Utility or msinfo32 report (press Windows* key + R key, type “msinfo32”, press OK and then File, Export) or both.Installation logs. You may...
View ArticleClik here to view.
Re: HP Spectre 13t-3000 CTO with embeded Intel Bluetooth (Intel AC 7260)...
Hello Kevin! Thanks for the help! The USB Bluetooth Adapter mentioned and in question is made by Canon, Bluetooth Unit BU-30, and is designed to plug into an internal USB port on the Canon Pixima...
View ArticleRe: HD 4400/Outlook 2013 distortion issue fixed in newer driver?
Hello Vibes This issue has been replicated and a resolution is being tested. I do not have a release date at this time for the updated driver that will resolve the issue so please check this thread for...
View ArticleRe: HD 4400/Outlook 2013 distortion issue fixed in newer driver?
Hello Vibes The latest driver just posted has the resolution for this issue. You can download here: 32-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=24349 64-bit:...
View ArticleRe: how do you fully recover a board?
thanks guys, I just figured it out. It takes moving the jumper to the other set of pins(top) and then bringing it up. then the flashall --recovery can do the work.
View ArticleMRAA - UART information is not defined for Edison?
I am using the MRAA library in some of my projects for the edison. Currently specifically for using SPI and GPIO pins for the ILI9341 TFT display (Adafruit 2.8" TFT breakout in this case). Now...
View ArticleClik here to view.
Re: Problem to connect wireless keyboard and mouse to the USB3 connections
Hi Riaan,I got my K400r working by using the temporary solution of not plugging the wireless receiver directly into the NUC (suggested by fellow NUC users), you may wanna consider that option till...
View Article