Problem with Intel(R) Wireless-N 7260 which works very slowly
Hi,I'm a new user of Lenovo ThinkPad E540 with Inter(R) Wireless-N 7260. Unfortunately, I have some problems with wireless access. Sometimes my laptop loses Internet connection. If it finds a...
View ArticleRe: Is there any gps breakout board or shield that work with intel galileo ?
Hi, May I ask what type of gps shield you used when connect to Intel Galileo Board? Since I looking for GPS Shield Retail Kit - RTL-12855 - SparkFun Electronics, but the shield looks not R3 footprint....
View ArticleIntel NUC D54250WKY Random startups since updating to BIOS 0.28
I have run openELEC on my intel NUC i5 for the last year with the IR commands in the autostart.sh and Bios 0.25 without any issues at all. Foolishly I upgraded the Bios to 0.28 and I had to remove the...
View ArticleRe: Intel® Wireless-N 7260 - slows
Pablo, I'm going to look at this situation as unbiasedly and as fact-based as possible in my response. The bottom line is, Intel has done nothing of productive use to fix this issue. Sure, there have...
View ArticleRe: Is there any gps breakout board or shield that work with intel galileo ?
Hi Sookfun, You can use that shield and GPS from Sparkfun. There is a little switch to select UART or DLINE, where you will need to use UART with the Galileo board, since you can't run serial...
View ArticleRe: Intel HD Graphics 4000, backlight flickering problem
Yes you have the latest driver. Have you checked the display settings under the nvidia control panel since you have a GT 630M?
View ArticleRe: Intel HD Graphics 4000, backlight flickering problem
I could only find one setting which could have something to do with power saving and I set it to max perfomance.Is there a reason why I cant disable/enable display refresh rate switching?
View ArticleRe: Microsoft Virtual Wifi Miniport is missing after replacing with a...
Try enabling the Wireless Hosted Networks by going to administrator elevated command prompt and typenetsh wlan set hostednetwork mode= allow Restart the PC and check and see if the miniport is there.
View ArticleClik here to view.
Re: Problem to connect wireless keyboard and mouse to the USB3 connections
And of course we have to remember in both the front usb ports keyboard and mouse do not work at all.other Devices are working.
View ArticleClik here to view.
Re: Big scare: my D54250WYK would not start
Thanks for the information.I meant the NUC is fine like that. There is nothing wrong with your BIOS or voltage rating. Please take a look at the picture below, it shows information about my NUC and see...
View ArticleRe: Do I need to replace the antenna?
Hi Kameechewa, it may not be strictly necessary to replace the antenna; however, we highly encourage contacting your system manufacturer in order to obtain a list of validated wireless adapter models...
View ArticleRe: Intel Raid SROMBSASMP2 Group Recovery
HKSMonaro I would recommend contacting Intel Customer Support for proper walk through of this process of recreating your RAID configuration.
View ArticleRe: Data migration software hangs after reboot and displaying "Starting...
Thanks, Kevin. However, it does appear as if the SSD is recognized as an Intel SSD since when the data migration software began it showed the target drive as an Intel SSD (but I don't know if that...
View ArticleRe: Intel Server Board S5520SC will not see PCI-e video card
That is the only video card installed.
View ArticleRe: Intel Starter Pack
@Cougar01, I sent you a private message. Thanks for your time and understanding. Allan.
View ArticleRe: Intel Server Board S5520SC will not see PCI-e video card
There is a raid controller plugged in a pci x1 slot but that is the only other thing plugged in
View ArticleRe: I want to get back Visual Bios
Hello jestebanc, I am sorry for your trouble but let me help you. All 8 Series Intel® motherboards come by default with the Visual BIOS and every single update will make internal changes but always...
View ArticleRe: Suitable SD voltage level translators?
Have you seen this one: PI4ULS3V08MZLE Pericom | PI4ULS3V08MZLE-ND | DigiKey Aren't you also going to need interfacing to the STM32?
View ArticleClik here to view.
Re: Problem with ig4icd32.dll
Hi PepeLeches, I am sorry you are having this problems but let me help you. Based on the report, the ig4icd32.dll may be related to openGL failure so there are some troubleshooting steps I would like...
View ArticleRe: USB Device and available current
Thanks, that the answer I was looking for. At least partly, because now I need to get this information in userland to be able to set the maximum available current. If anybody has an idea on how to do...
View Article