Re: Re: Enabling Wi-Fi Direct in wpa_supplicant package
Hi mhahn, I dug up all the log files from my Galileo. The most relevant appears to be the do_compile log, which I've pasted below. I would have expected a source file with 'p2p' in the name would...
View ArticleRe: How to connect Intel Galileo to PC as USB HID
In the first version of the IDE that was released there were examples called USB-Keyboard, and USB-Mouse. I tried to get these examples to work, but they would not even compile. These examples (along...
View ArticleRe: Sporadic but recurring connection dropouts on an Intel 6235 wireless adapter
Jose5 I have no reports of such issue but I will check about it.
View ArticleRe: error 0_ in bottom right after changing msconfig
Ok, so update. I did finally remove my 770 Graphics card and put in my old 580. Believe it or not I no longer got the zero. I was also able to get back into my BIOS and reset it back to default...
View ArticleRe: GPIO Driver
Greetings LifuWe are currently researching on this in order to give you a more accurate response. Regards, Juan Pablo
View ArticleRe: HD 4000 Graphics Issue
I'm sorry Joe but I can't accept your answer....j/kActually this issue resolved itself-I don't know why but everything is filled in now. How important is it that these Intel drivers are the "generic"...
View ArticleRe: How to connect Intel Galileo to PC as USB HID
The examples that are included under USBHost do compile in the latest IDE. I would recommend you to download the latest IDE and try them, to see if any of them is what you are looking for. Regards,...
View ArticleRe: Haswell NUC CIR receiver (ACPI issue?)
I've just tried the firmware. I can confirm it's working for Xbox 360 remote!Two remarkable things to notice:1) now the iRda is working in Openelec without having to use the autostart.sh hack2) the...
View ArticleClik here to view.
unable to execute i586-poky-linux-uclibc-gcc: No such file or directory
Hi Guys, "unable to execute i586-poky-linux-uclibc-gcc: No such file or directoryerror: Setup script exited with error: command 'i586-poky-linux-uclibc-gcc' failed with exit status 1"While installing a...
View ArticleRe: DMA in Galileo?
Hi AK51, Hardware interrupt is not supported on Galileo. Regards,Intel_Jesus
View ArticleRe: Galileo Minicom issues
If I remove the Arduino IDE support from the Galileo Board (just having the yocto linux image on sdcard) will it work? If so, how do I remove the Arduino IDE platform?
View ArticleGALILEO - Arduino blink sketch, claims: no such device or address
Arduino Blink sketch claims:C:\Intel_Galileo_Arduino\Arduino-1.5.3/hardware/arduino/x86/tools/izmir/clupload_win.sh line 24: /dev/ttyS2: no such device or address-com port: 4 , Arduino 1.5.3 lastest...
View ArticleRe: Arduino WiFi ConnectWithWEP sketch, claims: no such device or address
Hi 4J1a, Are you booting from the SD card? The SD card is mandatory for Wi-Fi, since the driver is not available from the SPI image. Take a look at the Intel® Galileo Getting Started section 11 for...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
I removed the SD Card and the WIFI card and get the same error running the Blink sketch.The blink sketch ran, and blinked, but now I get the error.The only real change was upgrading the 1.5.3 to the...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
In the line where the error occurs, I find the way the / and \ are used irregular. Would slash and backlash be causing the...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
Hi 4j1a, The "Arduino-1.5.3" should be in the root directory of your C drive due to a know issue with pathnames too long. Another thing to check is that the right port is selected or try switching to a...
View ArticleRe: GALILEO - Arduino blink sketch, claims: no such device or address
I have seen this issue several times. If restarting your PC and the Galileo does not work.Unplug your Galileo and follow the instructions in Overview | How to Find Hidden COM Ports | Adafruit Learning...
View ArticleRe: Intel® Wireless-N 7260 - slows
Joe, thanks for the tip with "disable uAPSD in the adapter properties ".Worked in my case - not ideally, but the speed doesn't drop down to ridicules 2 Mbps and no more "no network response"... Waiting...
View ArticleClik here to view.
How to active GPRS Shield V2.0 Intel Galileo
Has anyoneused thisintelGPRSonGalileoGPRS Shield V2.0 - Wiki
View ArticleRe: Galileo Minicom issues
Hi,I just want to transmit data serially. I want to avoid SSH.I think the Arduino uploads data via Y-modem. I am looking for a method to transmit cross-compiled file serially on to the Galileo....
View Article